Tuesday , March 2 2021

News – NASA InSight ties the landing after going to Mars

AND ALL YOU AND BYD HYN | What's Incoming – the biggest news coming down to the Earth from space

Scott Sutherland
Meteorologist / Science Writer

Monday, November 26, 2018, 4:25 PM – The NASA Lander InSight is now safe on Mars's surface, after daredevil transports through the thin atmosphere of the planet. With the nail part of the mission over, what's coming next?

At 2:54 p.m. EST, Monday, November 26, after more than six months of space travel, Mars InSight NASA started on the Red Planet, resting on a wide level field, known as Elysium Planitia.

Although there was no doubt on the landing, then quietly settled on the Far East, it was quite a different story here on Earth.

NASA's Propulsion Jet Propulsion Laboratory, Mission Management and Nearby Visitor von Karman, joined the voices of engineers, scientists, media representatives and social media attendants as a whole exploding mood!

According to NASA, everything about the landing was perfect, as planned, with the crews & banks and the MarCO performing fine on a timetable.

Immediately after landing, the first InSight act was to capture a picture of the landscape exactly from front. Although it is a grainy image, partially broken by the dust cover of the camera, it acts as the first reference point for the mission team, to bring together to to each other.

The first image returned by NASA InSight, from Elysium Planitia, after landing. Image has been zoomed by Gameryn InSight Tool Instrument (ICC), which is located on the cover. The dark creams on the image are dust particles stuck to the dust cover of the camera. Beyond them, dust cover bolts are visible along the edge of the bottom, one of the legs to the right to the right, and the Martian rock big-weh is visible nearby. In the distance the Mars horizons. Credit: NASA / JPL-Caltech

Now, after years of development, and months of tracking their accused through space, he was finally safe on the surface of Mars, ready to go on with an innovative science.

Watch Watch: NASA continues to live live in the InSight cleanup, with a command to the press for 5 p.m. ET (2 p.m. PT)


With InSight on Mars, what's coming next?

Although the dryer is safe and ready to work, there are a few steps that they need to go before it can start collecting data and sending them back to the Earth. Some are quite small, such as removing the dust from cameras to enable them to take better pictures of around. However, there are some big steps that InSight will take, goes on.

Step 1: Open its solar panels

During a touchdown, InSight landing jet may be starting a LOT of dust! As a result of a recent disappeared global dust storm, dust has redistributed over almost Mars's entire surface. Therefore, it is not known exactly how much dust is on the surface where the landowner is set down. It may be relatively dusty, as dust usually takes place elsewhere, or more water may have been deposited during the storm.

To ensure that InSight does not have solar panels covered when settling dust from the landing, it is waiting for 16 minutes before extending and disclosing its panels. That gives enough time to clearing the dust, so that InSight can collect as many initial power as possible.

The mission team says that, even if it only uses one panel, they can continue to achieve the mission, but if they do not use, for some reason, that's when the treasurer gets into trouble. Without the power of the Sun, its battery will run dry and will lose contact with InSight.

NASA will know that InSight has used its solar panels once the Marsh Odyssey orbiter flies over the location of the terrain, turns pictures of it, and sends those images back, about five hours after the landing.

Step 2: Transfer SEIS to the ground

Although InSight will use solar panels soon after landing, having its online tools and data collection will take much longer.

SEIS, the Seismic Experiment for Tuition Structure, is a sensor & marsquake & # 39; InSight, and at the moment she is currently lying on the bankside deck, up off the ground. In order to do its job properly, however, SEIS must be placed directly on the Martian surface.

As this is the main mission of InSight, however, the team needs to be very careful at this point.

It is projected that it will take them for two weeks to test the InSight systems and their actuated brother, before they send the orders to transfer SEIS from the dec lander to the floor. After that, it will follow by raising the Windtop and Thermal (WTS), a white dome with a rotational and scalemail edge at the bottom, which will be set over SEIS, to be assigned to & # 39 ; the surrounding environment.

Step 3: Using Heat Products

The other primary science experiments of this mission are Theat Probe – Mole & # 39; who digs its way deep under the surface, to give us an eye on what the temperature profile inside the planet likes.

Like SEIS, however, this tool also has to keep on the lander dec. So, once the InSight team is ready, they will set down the Heat Products on the ground, probably after the seismic instrument is in a position.


It will take weeks for InSight to start its main work, and months to years for the mission to have sound science results for internal Mars, but that is the mission that we have signed with. this land. The work, now that he has arrived at Mars, is to sit quietly on the surface and just listen to the planet.

However, the mission is not boring. The most direct results we get from InSight will come to cameras – as it takes panoramic images of the ground from its surroundings, using its stomachs, and self-suits of & # 39; to arm cameras – and very soon, we'll start to see results from a continuous weather monitoring station!

Set up for more up-to-date information about this historic mission!


You can also Like

Source link